Skip to main content

Video

Specification Data Sheet

The Conti IQ range of Lead Safe™ chrome plated electronic tapware is ideal for high-end or private restrooms that call for the convenience of automatic handsfree activation with the option of user-controlled settings.

Features

  • Modular one-piece construction with all serviceable components above the basin
  • Double infrared sensor with automatic setting feature and microprocessor
  • Bi-Stable magnetic solenoid valve (for increased energy savings)
  • Water supply connection with flexible high pressure hose and strainer
  • Mains power supply included
  • Iqua-click feature enables temporary - off (for cleaning purposes) or continuous water flow (for basin filling)
  • Appropriate mounting hardware included
  • Check valves and built in strainers
  • 12 or 24 hour hygienic rinse activatable with Iqua-click
  • Installation similar to conventional single lever taps

Technical Information

  • WELS: 6 Star Rating (4.5L/min)
  • Nominal Flow Rate (LPM): 4.3
  • WaterMark: AS/NZS 3718 Lic. WMKA20371
  • Operating pressure: 30kPa - 500kPa
  • Maximum water temperature: 80°C
  • Aerator: Economy aerator, cascade (self-cleaning)
  • Inlet Connections: 350mm long flexible hoses
  • Strainers: 0.5mm mesh size
  • Sensor-sensitivity: Automatic self-adapting sensor technology
  • Sensor range nominal: 102mm - 127mm
  • Hygienic rinse time: 2 minutes pre-set (adjustable from 0.5 to 20 minutes)
  • Temporary-off: 2 minutes (fixed)
  • Time out setting: 2 minutes — Maximum time tap will run upon continuous detection
  • Power supply: Mains power
  • Engineering standards: Noise class I, DIN EN 200; P-IX 9576 / IA

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.

Our Lead Safe™ product range is compliant with the Lead Free Requirements of the NCC 2022 Vol. Three, Clause A5G4(2) and NSF/ANSI 372.