Skip to main content

Specification Data Sheet

Galvin Flowmatic® electronic Lead Safe™ tapware is a technologically advanced range of handsfree tapware designed to reduce the risk of disease caused by contamination when operating tapware and flushing systems. The range is ideal for health care facilities, food preparation areas in hotels and restaurants and care facilities where patients suffer with arthritis. Flowmatic® tapware and valves play an important role in reducing water and energy consumption.

Features

  • Hands free/touch-free, electronically controlled sensor activated
  • Polished chrome plated with a sturdy metal housing
  • Powerful solenoid valve and water efficient aerator
  • Temperature adjustable (hot & cold) single temperature option available
  • Check valves and built in filters standard
  • Temporary-off and continuous-on options to suit specific client requests
  • Hygienic rinse water flow time adjustable to comply with health standards with adjustable 12, 24 or 72 hour hygienic rinse option
  • Easy installation similar to conventional single lever mixer tap
  • AS 1428.1 accessible compliant

Technical Information

  • WELS: 6 Star Rating (5.5L/min)
  • Nominal Flow Rate (LPM): 5.5
  • WaterMark: AS/NZS 3718 Lic. WMKA20371
  • Operating pressure: 30kPa - 1000kPa 
  • Maximum water temperature: 80°C 
  • Aerator: Economy aerator, cascade (self-cleaning) 
  • Inlet connections: 350mm long flexible hoses
  • Strainers: 0.5mm mesh size 
  • Sensor-sensitivity: Automatic self-adapting sensor                                                                                                                              
  • Hygienic rinse: Adjustable with touch from 30 sec - 20 min
  • Temporary-off: 2 minutes (fixed) 
  • Continuous water flow: 2 minutes present (Adjustable with touch 30 sec - 20 min)
  • Power supply: Mains Power 
  • Engineering standards: DIN EN 200; CE
  • Finish:  Chrome

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.

Our Lead Safe™ product range is compliant with the Lead Free Requirements of the NCC 2022 Vol. Three, Clause A5G4(2) and NSF/ANSI 372.