Skip to main content

Specification Data Sheet

Galvin Flowmatic® automatic flusher is fully concealed and utilises advanced technology that easily adapts to the required situation and environment. The demand for automatic flushers has been heightened by the community's awareness that disease can be spread by touching contaminated appliances and also by the increased vandalism of cisterns. The Flowmatic® automatic flusher combats these issues and is your best choice for new and existing projects.

  • The Flowmatic® automatic flusher is the latest in proven technology that ensures your installation is of high quality, simple to install with no call backs.
  • The multiple time cycle option is able to be adjusted on site which provides the facility manager the flexibility of adjusting to suit user requirements.
  • Flushed unit comes with stainless steel water hammer resistant 24V AC solenoids

Controller Requirements

  • The control box and sensors must be mounted within 3 metres of the supply valve
  • A 220 - 240V 50Hz 10 amp general purpose outlet must be supplied within 1 metre of the control box
  • All plumbing must comply with AS/NZS3500

Technical Information

  • WELS: 4 Star Rating (1.3L/min)
  • Nominal Flow Rate (LPM): 1.3
  • WaterMark: AS/NSZ 1172.2 Lic. WMK26456
  • Inlet: ½” BSP - Male 
  • Outlet: ½” BSP - Female 
  • Pressure Range (kPa): Min 100 - Max 1000 
  • Temperature (°C): Min 5 - Max 90 
  • Activation: Motion sensor
  • Program Type: PCB Control
  • Connections: AC Input & AC Output

Environmental Sustainability

We are ISO 14001 certified and take sustainability seriously. Our products are environmentally responsible designed to be healthier for users, save water and/or energy, and minimise carbon footprint. Our target is to reduce our carbon footprint by 25%, and the use of non-recyclable/non-compostable materials across the company (e.g. plastics) by 50%.

Warranty

Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed. Water and electrical supply conditions must also comply to the applicable national and/or state standards, failing to comply with these provisions may void the product warranty and affect performance of the product.

Please visit www.galvinengineering.com.au to view the full warranty, our Installation Compliance and Maintenance & Cleaning information as well as any other additional information.

While all reasonable care has been taken in compiling the information in this document, the designs, dimensions and products shown are indicative only and should not be relied upon without our prior approval. Due to our policy of continuous development, we reserve the right to alter any details of specifications or products without notice. All information, drawings, technical specifications and product designs remain the property of Galvin Engineering Pty Ltd.